Carbonochloridic acid, 2,2-dimethylpropyl ester - Names and Identifiers
Carbonochloridic acid, 2,2-dimethylpropyl ester - Physico-chemical Properties
Molecular Formula | C6H11ClO2
|
Molar Mass | 150.6 |
Density | 1.003g/mLat 25°C(lit.) |
Boling Point | 55°C36mm Hg(lit.) |
Flash Point | 32°C |
Vapor Presure | −0.65 psi ( 20 °C) |
BRN | 506655 |
Storage Condition | 2-8°C |
Refractive Index | n20/D 1.410(lit.) |
Carbonochloridic acid, 2,2-dimethylpropyl ester - Risk and Safety
Hazard Symbols | T - Toxic
|
Risk Codes | R10 - Flammable
R23 - Toxic by inhalation
R34 - Causes burns
|
Safety Description | S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
UN IDs | UN 2742 6.1/PG 2 |
WGK Germany | 3 |
FLUKA BRAND F CODES | 10-19 |
Carbonochloridic acid, 2,2-dimethylpropyl ester - Introduction
Neopentyl chloroformate, also known as amyl chloroformate, is an organic compound. The following is a description of the properties, uses, preparation and safety information of neopentyl chloroformate:
Nature:
-Appearance: Neopentyl chloroformate is a colorless liquid.
-Solubility: It can be dissolved in organic solvents, such as ethanol and ethers.
Use:
-Chemical synthesis: Neopentyl chloroformate can be used as a reagent in organic synthesis. It can be used for esterification, transesterification, etc.
-Solvent: Due to its good solubility, neopentyl chloroformate can also be used as a solvent in chemical experiments and industrial production.
Preparation Method:
The preparation method of neopentyl chloroformate is usually achieved by transesterification of chloroformate and pivalate. Specific synthetic methods may vary, but generally involve reacting chloroformate and pivalate under suitable conditions to produce neopentyl chloroformate.
Safety Information:
-Toxicity: Neopentyl chloroformate has certain toxicity, should pay attention to safe operation, avoid contact with skin, eyes and inhalation.
-Fire hazard: Neopentyl chloroformate is a flammable liquid and should be avoided from fire and high temperatures.
-Storage conditions: Neopentyl chloroformate should be stored in a sealed container, away from fire and oxidizing agents.
When using neopentyl chloroformate, follow relevant safety procedures and comply with local safety regulations.
Last Update:2024-04-09 21:04:16